Surface Preparation - If you're applying over your old countertop surface and it has been prepared with our Bonding Primer & Sealer, lightly sand with 220 grit and wipe off the dust before applying. If you're making new countertops out of MDF or sanded plywood, no need to sand before applying Epoxy Undercoat
Application - Sir thoroughly before use. To remove the plastic lid to minimize leakage, slightly warm with a heat gun and pull up on white plastic on the can. Apply a uniform, thin coat to your project using a roller of your choice. It's important to let the first coat fully dry before applying the second. Allow the second coat to dry a minimum of 4 hours before moving on to the epoxy coating.
Clean up - Remove all paint splatters and wash all rollers, frames and paint pans with warm soapy water
Size: 1 quart (32 oz.)
Coverage: 1 can = approximately 40 square feet (Two thin coats)
Colors: White & Black (Combining white and black creates a custom shade of gray.)
